Purite Integra L

For clinical analyser feed

Type I, II or III water / RO water / Deionised (DI) water / Ultrapure water (UPW) water

The self-contained, compact Purite Integra L water purification units are designed to provide a choice of Type I, II or III quality laboratory water, to meet the varied needs of laboratory staff.

The unit is capable of providing a consistent flow of purified water to multiple take-off points via a ring-main.

Capable of delivering up to 600 l/hr
ASTM Type I, II or III water and BS EN ISO grade 1,2 or 3 water
Integrated data logging
Colour LCD screen display
Versions for soft and hard water

Overview:

The Purite Integra L water purification unit uses proven reverse osmosis technology, in conjunction with activated carbon and particulate filtration, plus the option of UV disinfection, sub-micron filtration and deionisation, to produce water quality starting from a minimum of 30μs/cm.

Purified water is stored in an integral 250 litre stainless steel tank, while features such as integrated colour LCD display and control, and low-energy membranes help to minimise running costs.

Features:

Single compact unit which purifies, stores and distributes lab water
Produces up to 600 l/hr
Can supply ring mains of potentially up to 200 metres (application and site dependent)
Provides ASTM Type I, II or III water and BS EN ISO grade 1,2 or 3 water
Utilises reverse osmosis technology, in conjunction with activated carbon and particulate filtration as part of the first stage of purification
Integrated data logging for performance traceability equipped as standard
Delivered factory tested for ease of installation
LCD screen display for ease of operation.

Tech Specs

Consumables

Downloads

Tech Specs

Unit specification
Width (mm)	1000
Depth (mm)	750
Height (mm)	1800
Maximum Shipping Weight (kg)*	310
Maximum Working Weight (kg)*	550

Installation requirements
Power	Single Phase, 110-230V, +/- 10%, 50/60 Hz
Feed Water	Potable*
Maximum TDS (ppm)	1000
Minimum inlet pressure – psi (bar)	15 (1)
Maximum inlet pressure – psi (bar)	90 (6.2)
Feedwater temperature	1-30^oC
Flowrate	–
Free chlorine	Must be dechlorinated

*Softened feed water required for 600 l/hr (Integra L^S). Integra L^H can operate on hard water up to 400ppm as CaCO₃

System specification
Pure water storage	250 litres
Display panel	LCD – Colour touch screen
Pre-treatment	5μm pre-filter
Reverse osmosis	Low energy membranes
Deionisation	Optional Di packs*
Micro filtration	Optional 0.2μm**
UV lamp	Optional 254nm**
Purified water make-up flowrate @ 10°C	200 – 600 l/hr***
Purified water distribution	Up to 3000 l/hr
Carbon dioxide degassing	–
TOC reduction	Optional*