Pure Water Boost Pump
Pure Water Boost Pump
For clinical laboratory water
The Purite Mini Pure Water Boost Pump is designed for use with a wide range of laboratory equipment, providing a consistent flow of pressurised water. Typical applications range from glass washers and environmental chambers, to humidity cabinets and autoclaves.
Pure Water Boost Pump
For clinical laboratory water
The Purite Mini Pure Water Boost Pump is designed for use with a wide range of laboratory equipment, providing a consistent flow of pressurised water. Typical applications range from glass washers and environmental chambers, to humidity cabinets and autoclaves.
£336.88
Overview:
The mini pure water boost pump is an on demand, delivery pump which can be used with any pure water system.
It is controlled by a built-in pressure sensing switch, which starts and stops the pump automatically when the outlet pressure drops or increases.
Installed on the outlet from a pure water supply tank it will provide a flow rate of up to 60 litres per hour and at a pressure of up to 3 bar.
Ideal applications include pressurised pure water supply for glasswashers, environmental chambers, humidity cabinets, autoclaves, corrosion testing equipment, single points of use and for any laboratory equipment that requires a pressurised feed.
Installation is simple, and uses 8mm push fit connections for the inlet and outlet (supplied) and connects to the mains electric supply with a standard 3 pin plug.
Features:
- Compact and free standing
- Produces pressurised feed up to 3 bar
- Flow rate up to 60 l/hr
- Provides on demand operation
- Simple to install
- Available ex-stock.
Tech Specs
Unit specification | |
---|---|
Output pressure | 3 bar maximum |
Outlet flow | 60 l/hr maximum |
On / Off cycles | 6 per minute maximum |
Feedwater | < 150 microns particulates |
Operating temperature | 5ºC to 46ºC |
Power required | Single Phase, 230V, +/- 10%, 50 Hz |
Shipping weight | 3kg |
Dimensions (w x h) | 170mm x 275mm |