Purite Purewater 300 Package
Purite Purewater 300 Package
The Purite Purewater 300 Package is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1MΩ.cm at a flow rate of up to 48 litres per hour.
It can be fitted with an on-demand pure water boost pump (optional extra) to provide up to 4.5 bar pressurised feed with a flow rate of up to 4500 litres per hour.
Price range: £5,650.00 through £6,315.00
Purite Purewater 300 Package
The Purite Purewater 300 Package is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1MΩ.cm at a flow rate of up to 48 litres per hour.
It can be fitted with an on-demand pure water boost pump (optional extra) to provide up to 4.5 bar pressurised feed with a flow rate of up to 4500 litres per hour.
Price range: £5,650.00 through £6,315.00
Overview:
The Purite Purewater 300 Package is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1MΩ.cm at a flow rate of up to 48 litres per hour.
It can be fitted with an on-demand pure water boost pump (optional extra) to provide up to 4.5 bar pressurised feed with a flow rate of up to 4500 litres per hour.
Features:
- Guaranteed > 1MΩ.cm water quality
- Production rate up to 48 litres per hour @ 25 deg C feed water temperature
- 100 litre water storage tank
- On-demand pure water boost pump for pressurised output – optional
- Additional high flow gravity outlet
- Compatible with all laboratory glassware washer manufacturers
Tech Specs
| Unit specification | |
|---|---|
| Width (mm) | 440 |
| Depth (mm) | 560 |
| Height (mm) | 750 |
| Maximum Shipping Weight (kg)* | 51 |
| Maximum Working Weight (kg)* | 59 |
| Installation requirements | |
|---|---|
| Power | Single Phase, 110-230V, +/- 10%, 50/60 Hz |
| Feed Water | Potable |
| Maximum TDS (ppm) | 1000 |
| Minimum inlet pressure – psi (bar) | 10 (0.5) |
| Maximum inlet pressure – psi (bar) | 30 (2) |
| Feed water temperature | 1-35oC |
| Make up outputs @ 10oC (l/hr)* | 30 |
| Make up outputs @ 25oC (l/hr)* | 48 |
*Outputs based on a feed water pressure of 4 bar
| System specification | |
|---|---|
| Pure water storage | 20 litre storage tank as standard (External 50 & 100 litre tanks available) |
| Display panel | LCD – Colour touch screen |
| Pre-treatment cartridge | ✓ |
| Reverse osmosis | ✓ |
| Deionisation cartridge | ✓ |
| Internal filtration | – |
| Point of use | – |
| UV lamp | – |
| Recirculation pump | – |
| Ultrapure polishing cartridge | – |
| Treated water specification | ||
|---|---|---|
| Inorganics | > 1MΩ.cm | |
| pH1 | Neutral | |
| Bacteria | > 99% rejection2 | |
| Organics – TOC (ppb) | < 50 | |
| Particles | – | |
| Endotoxins | – | |
| DNases | – | |
| RNases | – | |
| Dispense modes | Gravity, Pressure feed | |
| Dispense flow rate | up to 200 l/hour @ 1.5 bar | |
1pH of stored water may decrease due to absorption of free carbon dioxide
2 When measured directly across the membrane
