Purite Integra HP
For clinical analyser feed
Type I, II or III water / RO water / Deionised (DI) water / Ultrapure water (UPW) water
The Purite Integra HP is a compact high volume laboratory water purification and distribution unit, capable of providing a wide range of options. The unit provides a minimum flow rate of 400l/hour at water qualities between 30μs/cm and 18.2MΩ-cm.
- Range of make-up rates 60/120/190 l/hr
- Integral 50 litre purified water storage tank
- Full colour LCD touch screen display
- Low energy recirculation pump
- Optional manual by-pass to provide continuity of service
Overview
Features
Unit Specification
System / Treated Water Specification
Downloads
Overview
Purite Integra HP | Overview
The Purite Integra HP incorporates reverse osmosis and ultra violet radiation technologies, with internal storage and distribution pump; carbon dioxide, membrane degassing and bacterial filtration are available as options.
The use of a low-energy recirculation pump reduces energy consumption, while an integrated colour touchscreen display provides full monitoring and control.
Features
Purite Integra HP | Features
- Produces 120 or 190 l/hr (requires softened feed)
- Option of Integral 50 litre or external 300 litre purified water storage tank
- Optional carbon dioxide membrane degasser to enhance deioniser capacity
- Range of polishing deioniser options to meet all purity requirements and standards
- Full colour LCD touch screen display for ease of operation
- Low energy recirculation pump to conserve energy during periods of low demand
- Cat5 compliant break tank to comply with water regulations
- Optional manual by-pass to provide continuity of service in an emergency.
Unit Specification
Purite Integra HP | Unit Specification
| Unit specification | HP IT | HP GP* |
|---|---|---|
| Width (mm) | 890 | 1110 |
| Depth (mm) | 500 | 604 |
| Height (mm) | 840 | 1842 |
| Maximum Shipping Weight (kg)* | 95 | 134 |
| Maximum Working Weight (kg)* | 140 | 467 |
*Complete with plinth and 300 litre tank
| Installation requirements | HP IT | HP GP |
|---|---|---|
| Power | Single Phase, 230V, +/- 10%, 50 Hz** | Single Phase, 230V, +/- 10%, 50 Hz** |
| Feed Water | Potable | Softened |
| Maximum TDS (ppm) | 1000 | 1000 |
| Minimum inlet pressure – psi (bar) | 30 (2.1) | 30 (2.1) |
| Maximum inlet pressure – psi (bar) | 90 (6.2) | 90 (6.2) |
| Feedwater temperature | 1-30oC | 1-30oC |
| Flowrate | 400l/hr (min) | 400l/hr (min) |
| Free chlorine | Must be dechlorinated | Must be dechlorinated |
**110v 60Hz available as an option
System / Treated Water Specification
Purite Integra HP | System / Treated Water Specification
| System specification | HP IT | HP GP |
|---|---|---|
| Pure water storage | 50 litre | 300 litre |
| Display panel | LCD – Colour touch screen | LCD – Colour touch screen |
| Pre-treatment | 5μm pre-filter | 5μm pre-filter |
| Reverse osmosis | Low energy membranes | Low energy membranes |
| Deionisation | Various cylinder options | Various cylinder options |
| Micro filtration | Optional 0.2μm | Optional 0.2μm |
| UV lamp | 254nm | 254nm |
| Purified water make-up flowrate @ 10°C | 120 or 190 l/hr | 120 or 190 l/hr |
| Purified water distribution | Up to 270 l/hr and a max of 3 bar | Up to 270 l/hr and a max of 3 bar |
| Carbon dioxide degassing | Optional | Optional |
| Treated water specification | HP IT | HP GP |
|---|---|---|
| Conductivity | < 30μs/cm to 18.2MΩ-cm* | < 30μs/cm to 18.2MΩ-cm* |
| Bacteria | < 1cfu/ml** | < 1cfu/ml** |
| Organics – TOC (ppb) | < 30ppb | < 30ppb |
| Particles | < 0.2μm** | < 0.2μm** |
*pH of stored water may decrease due to absorption of free carbon dioxide
Downloads
