Purite Integra E
For hospital sterile services and endoscopy units
Type I, II or III water / RO water / Deionised (DI) water / Ultrapure water (UPW) water
The Purite Integra E range is designed to take potable feedwater direct from the mains, purify it using Reverse Osmosis technology, store it in an integral storage tank and then circulate it via a pressurised ringmain to feed endoscope washing disinfectors.
Purite Integra E | Overview
The unit is available in two versions tailored to the feedwater. The Purite Integra EH is for hard feedwater and the Purite Integra ES is for softened feedwater.
Purite Integra E | Features
- Water purification units to provide HTM 01-06 / ISO 15883 quality water for use with endoscope washing machines
- Fully compliant with HTM 01-06 and ISO 15883
- Integrated data logging for performance traceability
- Self contained
- Delivered factory tested for ease of installation
- Graphic displays for access to system parameters
- Can supply ring mains of potentially up to 200 metres (application and site dependent).
Integral pure water tank – Ensures water is always available on demand. Tank is fully drainable and bacterially protected to comply with HTM 01-06.
Integral raw water break tank with Type AB air gap – Eliminates the possibility of water backflow and complies with water bylaws.
Self contained unit design – All components are integrated into a neat housing, designed to fit through standard sized doors and on wheels for enhanced portability.
Minimal installation and commissioning – All components are factory tested ensuring the unit simply requires connection to relevant on site services.
Semi-automatic chemical clean – With automatic chemical draw, recirculation and rinse, cleaning is straight forward and trouble free.
Bio Sample Point – Incorporation of a hygienic, fully sanitisable, stainless steel, sample valve reduces the risk of contamination during sampling.
Alarm conditions – Critical operating parameters are automatically monitored, including the quality of the purified water and level in the pure water tank.
User friendly display – Backlit display clearly shows the unit operation in graphic and text formats.
Standby mode – During periods of low demand the system will compensate, reducing power consumption and running costs.
Integrated data logging – Up to 12 months data can be captured, enabling a permanent printed record of all parameter and status changes, in line with Good Manufacturing Practice (GMP).
Purite Integra E | Unit Specification
| Unit specification | Integra ES | Integra EH |
|---|---|---|
| Width (mm) | 1000 | 1000 |
| Depth (mm) | 750 | 750 |
| Height (mm) | 1800 | 1800 |
| Maximum Shipping Weight (kg)* | 310 | 310 |
| Maximum Working Weight (kg)* | 550 | 550 |
| Installation requirements | Integra ES | Integra EH |
|---|---|---|
| Power | 240V/50Hz | 240V/50Hz |
| Minimum inlet pressure – psi (bar) | 14.5 (1) | 14.5 (1) |
| Maximum inlet pressure – psi (bar) | 87 (6) | 87 (6) |
* Uncrated weight
Purite Integra E | Treated Water Specification
| Treated water specification | Integra ES | Integra EH |
|---|---|---|
| Output @ 10°C (l/hr) | 600 | 225 |
| Feedwater hardness (ppm CaCO3) | < 4 | 400* |
| Feedwater temperature (°C) | 1-30 | 1-30 |
| Feedwater pressure (bar) | 1-6 | 1-6 |
| Pure water recovery (max %) | 70 | 25 |
| Feedwater consumption (max l/hr) | 900 | 900 |
| Pure water tank volume (l) | 250 | 250 |
| Drain flowrate | 300 | 675 |
*In conjunction with SUEZ Water Purification Systems UK recommended sanitisation program
**If the temperature falls below 10˚C output will reduce by up to 3% per ˚C
